IPS Gauge for GR86 BRZ 2022+

For Instructions of Installation, Firmware and more Information please click here!

---

Round IPS gauge that will fit in your air vent. Plug and Play, installation only takes 20 minutes. Very customizable via built in menu. With future firmware updates and compatibility with 2022+ cars.

Here are What can be configured via Main Menu system:

• “Brightness”
• “Temp Units”
• “Pressure Units”
• “AFR Units”
• “Low Power sleep”
• “Allow Peak”
• “Distance Units”
• “Gauge Color”

Here are the Different Screens that can be changed :

• “RPM”
• “SPEED”
• “AFR”
• “Water Temp”
• “Oil Temp”
• “Water/Oil Temp”
• “Boost”
• “Accel”
• “Intake Air Temp”
• “Battery Voltage”
• “Engine Load”
• “Fuel Pressure”
• “IGN Timing”
• “MAF”
• “Fuel Level”
• “EGR Temp”
• “TPMS Info”
• “Active sound control”
• “Eth %”     (GJP IO BOX)
• “Eth TEMP”     (GJP IO BOX)
• “Port Fuel Press”   (GJP IO BOX)
• “Oil Pressure”   (GJP IO BOX)
• “Water Pressure”      (GJP IO BOX)

 

Power Settings:

The older v1.0 gauge cables draws about 2.5mA when off.  If your not driving for more than a couple of weeks. Recently we introduced a v2.0 cable and firmware to go along with any new orders that allow the gauge to be fully powered off. Contact us via email if you would like a 2.0 cable on a older pre 2.0 firmware gauge.

How the gauge works:

When the car engine is not running, the gauge is off. You can press and hold both buttons for 8 seconds to get into Main menu and change settings. When the engine starts and runs your normal gauges will be running. Pressing and holding both buttons for 2 seconds will reset the “Max” value, holding it for 4 seconds will allow you to select a different data to display on whatever Page you are on. You can flip through 8 customizable pages.

 

 

 

 

Extra Product Information:

This product is subject to your normal Returns & Warranty. Including 15% stocking fee if returned.

This product is subject to our normal processing times for orders for 1-5 days average.