This unit does not and can not connect to the main ecu network, so this will not work with ecutek, it will also not work with our IPS gauge.

* Although this outputs canbus, we only have tested on AIM dataloggers. This may work with other dataloggers, but due to so many variations… etc.. its extremely difficult having to help out each person with their own brand of obd2 adapter, differnt softwares etc.. So from here on out we will only offer support for AIM data logging. *

For Install instructions and further detail click here.

You will need a ASC adapter For GEN2 (22+) to go along with like this.

There is a fantastic ride up from recommended dongle makers with even more features, you can use our kit with. So please check out the write up.

This is our dedicated low cost pressure monitoring kit. Unlike our flex fuel kits with the oil pressure addon, this a standalone product intended only to monitor oil pressure. This Kit is meant to connect to the “B CAN network”. The network typically used in ASC connector harnesses, so you will be able to use this kit along side of this. We include the pressure sensor, and the top galley adapter. (This is threaded in NPT 1/8), and a front adapter thats is a NPT to BSPT to replace the factory pressure switch. either option can be used.